Your logo, colors and local prices. Homeowners get an instant deck estimate and you get their request by email. We install it for you. No view limits. Cancel anytime.
Calculate deck building costs instantly. Compare pricing for composite, cedar, and pressure-treated decks with 2026 material and labor rates.
| Deck size | Pressure-treated wood | Composite |
|---|---|---|
| 10 × 10 (100 sq ft) | $2,500–$4,500 | $4,000–$7,000 |
| 12 × 12 (144 sq ft) | $3,600–$6,500 | $5,800–$10,000 |
| 12 × 16 (192 sq ft) | $4,800–$8,600 | $7,700–$13,400 |
| 16 × 20 (320 sq ft) | $8,000–$14,400 | $12,800–$22,400 |
| 20 × 20 (400 sq ft) | $10,000–$18,000 | $16,000–$28,000 |
Ranges assume a ground-level or single-story deck with basic railing at roughly $25–$45/sq ft for pressure-treated and $40–$70/sq ft for composite. Second-story decks, stairs, and premium railing push past these ranges.
Labor is usually $15–$35 per square foot, about 35–55% of the installed price. Carpentry crews bill roughly $40–$100 per hour; a two-person crew typically builds a 12 × 16 deck in three to five days. Height, tight access and angled or picture-frame designs add labor.
New boards and railing on existing joists: about $18–$28/sq ft for pressure-treated and $30–$42/sq ft for composite, including tear-off.
New-deck price plus demolition and disposal of about $5–$15/sq ft ($500–$2,500 for most decks). Rot in the ledger board or joists is the most common surprise.
A roof roughly doubles the budget: an aluminum patio cover kit runs about $4,500–$8,500 installed on a 12 × 16 deck, a framed shed roof $6,500–$12,000 and a gable roof $8,500–$16,000. Roofs need their own posts and footings and usually a permit with engineered drawings; compare with the roof deck calculator and check fees with the permit fee estimator.
Most deck replacements cost $15–$45 per square foot including demolition, or about $5,000–$25,000 for typical sizes. Reusing a sound frame and footings is the biggest saving.
Deck labor usually runs $15–$35 per square foot, or 35–55% of the total. Ground-level decks sit at the low end; second-story and complex designs can pass $40 per square foot.
Price the deck, then add the cover: about $4,500–$8,500 for an aluminum patio cover and $6,500–$16,000 for a framed shed or gable roof on a 12 × 16 deck.
Related: landscaping cost · concrete patio cost · pool cost · handyman prices · home value
A new deck is one of the highest-ROI home improvements — adding livable outdoor space that returns 65–80% of its cost at resale. Whether you're building a simple pressure-treated platform or a multi-level composite deck with built-in lighting, understanding the full cost breakdown helps you budget accurately and evaluate contractor bids.
The average deck costs $15–$50 per square foot installed in 2026, with most homeowners spending $8,000–$18,000 for a quality mid-sized deck. Total cost depends on material choice, deck size, railing type, stairs, site conditions, and local labor rates.
Material is the single biggest driver of deck cost. Here's what you'll pay per square foot installed, including framing, decking boards, and labor:
Common deck sizes and their estimated costs installed. Prices include framing, decking boards, and basic labor but exclude railing and stairs:
Railing adds $1,500–$10,000+ to a typical deck project and significantly impacts both safety and aesthetics. Here's what you'll pay per linear foot installed in 2026:
Deck construction costs swing 20–45% by region due to differences in contractor wages, permit requirements, and material freight. In high-cost metros, permit costs typically run $800–$1,500 for attached decks:
The choice between composite and pressure-treated comes down to budget, maintenance tolerance, and intended lifespan:
Capture leads while visitors get instant estimates. Monthly managed plans keep estimates, lead capture, and updates working.
See Monthly PlansRequest Managed SetupBuilding a deck costs $4,500–$22,000 on average, or $15–$50 per square foot installed. A 300 sq ft pressure-treated deck runs $4,500–$7,500, while the same size in composite (Trex) costs $7,500–$13,500. Cost depends on material, size, railing, stairs, and location. In high-cost metros, add 20–45% above national averages.
Composite decking (Trex, TimberTech, Fiberon) costs $25–$45 per square foot installed, or $7,500–$13,500 for a 300 sq ft deck. Premium composite with hidden fasteners and matching railing can reach $50–$70/sqft. Composite costs 40–80% more than pressure-treated upfront but lasts 25–30 years with minimal maintenance.
Pressure-treated (PT) pine decks cost $15–$25 per square foot installed, or $4,500–$7,500 for a 300 sq ft deck. PT is the most affordable option but requires staining or sealing every 1–3 years. Boards may need replacement after 10–15 years in wet climates.
Most municipalities require a permit for attached decks, decks over 30 inches above grade, or decks over 200 sq ft. In high-cost metros, permits cost $800–$1,500 and require structural drawings. Unpermitted decks can cause problems when selling your home.
Deck construction costs swing 20–45% by region. In high-cost metros a 300 sq ft PT deck runs $5,500–$9,500 and composite runs $9,000–$16,000, while lower-cost areas run up to 20% below national. Very-high-cost coastal markets (SF, NYC, coastal California) pay the highest rates. Permits typically add $800–$1,500 in higher-cost jurisdictions.
A 300–400 sq ft deck takes 3–7 days with a 2-person crew. Permit processing adds 1–4 weeks. Plan 4–8 weeks from first contact to project completion in most markets. Complex multi-level decks can take 2–3 weeks of construction time.
Enter your email to unlock the full breakdown with per-sqft pricing and a downloadable quote.
Skip for nowNeed a custom calculator for your trade business? We'll get back to you within 24 hours.